Raymarine L1250DRC, Owner'S Handbook Manual

Page: 173 / 246

Chapter 7: Standard Chart Operations 7-29
Ed
iti
ng a R
oute
Note: If you Clear the route before it is Saved, the new waypoint is removed.
Adding Waypoints at the End of the Route
➤
To add waypoints at the end of the route:
1. Press the
ROUTE
soft key, followed by the
EDIT ROUTE
soft key.
The Make Route soft keys are displayed and the cursor is connected to the
last-placed waypoint with a dotted line. You can add further waypoints to
the route in the same way as for a new route.
2. Move the cursor to the desired location and press
PLACE WAYPOINT
soft
key.
If you place the waypoint in the wrong position, press the
UNDO WAYPOINT
soft key.
Note: You can
UNDO
waypoints in the original route, not just the new ones.
3. Place as many waypoints as desired and press the
ACCEPT ROUTE
soft key,
the default soft keys are displayed.
Removing a Waypoint from the Route
➤
To remove a waypoint from the current route:
1. Move the cursor over the desired waypoint until the letters
WPT
are dis-
played. The waypoint soft keys are displayed.
2. Press the
REMOVE WAYPOINT
soft key. The waypoint is removed from the
route and the route is re-numbered.
Alternatively, you can remove the last waypoint from a route by pressing the
UNDO WAYPOINT soft key, as described above in
Adding Waypoints at the
End of the Route on page 7-29 .
If the route has not been saved, the waypoint is erased.
If the route has been saved, the waypoint remains on the screen.
Reversing the Route
➤
To reverse the route, so you can Follow the route back:
1. Either press the
ROUTE
soft key followed by
MORE
,
or move the cursor over the desired waypoint until the letters
RTE
are dis-
played.
The route soft keys are displayed.
2. Press the
REVERSE ROUTE
soft key. The current route is reversed on the
screen.
ROUTE
EDIT
ROUTE
PLACE
WAYPOINT
UNDO
WAYPOINT
ACCEPT
ROUTE
WPT
REMOVE
WAYPOINT
ROUTE
REVERSE
ROUTE
81213_1.book Page 29 Monday, March 17, 2003 1:14 PM