Raymarine L1250DRC, Owner'S Handbook Manual

Page: 77 / 246

Chapter 3: Getting Started 3-11
Da
taba
se
L
ists
Database Lists
The waypoints, routes and tracks that you create on the chartplotter are stored
in database lists. You can view these lists and select items for editing.
Figure 3-7: Typical Database List
As with pop-up menus, when a database list is on-screen, a set of associated
soft keys is also displayed. You use the trackpad to select an item from the list,
then use the appropriate soft key to edit the item. For example, you can erase a
waypoint or a route.
3.4 Simulator Mode
The HD Series Fishfinders include a simulator function that enables you to
practice operating in Sonar and Chartplotter (Raychart models only) modes
without data from the transducer or GPS system.
If you have not yet installed the full fishfinder system, you can still operate in
Simulator mode by connecting the module and display devices via the HSB
cable. For power, connect a 12V or 24V DC power supply, attaching the red
wire via a quick blow fuse to positive and the black wire to negative.
Fuse values:
Display unit:6A for 12V or 4A for 24V
DSM250:
8A
Note: Before using Simulator mode, make sure the HSB cable is connected
from the DSM250 to the display unit and that both the DSM250 and display
unit are connected to ship’s power.
GOTO
WAYPOINT
EDIT
WAYPOINT
MAKE NEW
WAYPOINT WAYPOINT
TRANSFER
D4262-2
WAYPOINT LIST
SYMBOL NAME
WAYPOINT 001
WAYPOINT 002
WAYPOINT 003
WAYPOINT 004
WAYPOINT 005
50°21^966N
001°20^368W
POSITION
BRG _186°
RNG _21.0nm
TEMP
---°
C
DEPTH
---
m
DATE --/--/-- TIME --:--:--
81213_1.book Page 11 Monday, March 17, 2003 1:14 PM