Raymarine L1250DRC, Owner'S Handbook Manual

Page: 155 / 246

Chapter 7: Standard Chart Operations 7-11
Pla
ci
ng a W
ay
poin
t
Note: You can enter waypoints as Loran TDs which are converted to Lat/
Long coordinates. However, although the waypoint is shown in both Lat/
Long and Loran TDs in the Waypoint List, you can subsequently only edit
the position as Lat/Long coordinates. TD entries in the Waypoint List are
shown only for those waypoints which were entered as TDs.
3. Edit the Loran parameters as desired, using:
i. The
CHAIN
soft key, which enables selection of both the Chain and it’s
Slave:
ii. The
ASF1/ASF2
soft key, which presents two soft keys for editing
ASF 1
and ASF 2 parameters independently :
iii. The
SET TD 1
and
SET TD 2
soft keys, which enable editing of each TD’s
parameters independently.
CHAIN ASF1/ASF2 SET TD 1 SET TD 2
CHAIN 6731 - NELS Lessay
SLAVES Y - Z (24 -39)
TD 1 29138.0
TD 2 44713.8
ASF 1 +0.0
ASF 2 +0.0
WPT POSITION (LORAN TDs)
D5591-1
SELECT CHAIN
CHAIN 6731 - NELS Lessay
SLAVES Y - Z (24 -39)
TD 1 29138.0
TD 2 44713.8
ASF 1 +0.0
ASF 2 +0.0
WPT POSITION (LORAN TDs)
D5592-1
SELECT SLAVES
SET ASF 1 SET ASF 2
D5593-1
81213_1.book Page 11 Monday, March 17, 2003 1:14 PM