Raymarine L1250DRC, Owner'S Handbook Manual

Page: 105 / 246

Chapter 5: Adjusting the Display 5-5
Sel
ec
ti
ng
th
e Mo
d
e
of Ope
ra
tio
n
2. Continue to press
DISPLAY
until the desired mode is shown.
The selected mode is shown by an icon with a red border and the mode is
displayed on the screen. The associated soft keys are also displayed.
3. Press
ENTER
or
CLEAR
to display the selected full screen mode.
or
You can set Windows On to split the display into two half-screen windows
(horizontal or vertical) to show supplementary data, or to display sonar
and chart or radar simultaneously. Split screen options are described in the
following sections
Figure 5-1: Selecting the Mode Using the DISPLAY Key
Horizontal Half -Screen Window Options
Using horizontal half screens, the main operating mode is displayed in the
upper window; you choose what is displayed in the lower window.
The following information, if available on your system, can be shown:
Table 5-1: Horizontal Half-Screen Window Options
Full-screen mode Horizontal Half-Screen Window Options
Sonar Mode CDI, BDI, Depth/Temp, Chart, Radar
Chart Mode CDI, BDI, Nav Data, Radar, Sonar
Radar Mode CDI, BDI, Nav Data, Chart, Sonar
Data Log Mode Half-screens not available
SPLIT
HOR VER
BRG 099o R
RNG 2.410 nm
CURSOR
60
0
0
ft
D6212-1
"DISPLAY" TO SELECT FULL SCREEN OPTION
SOFTKEYS TO SELECT WINDOW OPTION
CHART SONAR LOG
RADAR
SELECT
WINDOWS
WINDOWS
OFF ON
SPLIT
HOR VER
SELECT
WINDOWS
WINDOWS
OFF ON
SPLIT
HOR VER
81213_1.book Page 5 Monday, March 17, 2003 1:14 PM