Raymarine L1250DRC, Owner'S Handbook Manual

Page: 35 / 246

Chapter 2: Installation 2-3
EM
C Insta
lla
ti
on
G
ui
de
lin
es
• If a suppression ferrite is attached to a cable, this ferrite should not be
removed. If the ferrite needs to be removed during installation it must be
reassembled in the same position.
Suppression Ferrites
The following illustration shows typical cable suppression ferrites used with
Raymarine equipment. Always use the ferrites supplied by Raymarine.
Figure 2-2: Typical Suppression Ferrites
Connections to Other Equipment
If your Raymarine equipment is to be connected to other equipment using a
cable not supplied by Raymarine, a suppression ferrite must always be
attached to the cable that is closest to the Raymarine unit.
D3548-3
81213_1.book Page 3 Monday, March 17, 2003 1:14 PM