Raymarine L1250DRC, Owner'S Handbook Manual

Page: 121 / 246

Chapter 5: Adjusting the Display 5-21
Usin
g Zoo
m
Figure 5-9: Zoom with Split Screen
4. Press the
ZOOM AUTO MAN
soft key to toggle the setting between
AUTO
and
MAN . The automatic setting adjusts the position of the zoom window so
that bottom details are always in view. The manual setting enables you to
reposition the range of the zoomed image.
5. For zoom level selection, press the
ZOOM X 2 4 6
soft key until the desired
zoom level is selected. The greater the zoom, the smaller the area you are
viewing, so the smaller the Zoom Range Bar.
6. Press
ENTER
or
CLEAR
to select.
➤
To turn off Zoom:
1. Press the
ZOOM
soft key.
The Zoom soft keys are displayed.
2. Press the
ZOOM ON OFF
soft key to toggle zoom off.
3. Press
ENTER
or
CLEAR
to return to the default display.
If manual zoom is selected, you can reposition the area of the image that is
zoomed.
➤
To reposition the zoom window:
1. If you have not already done so, make sure the unit is set to
MANUAL
zoom.
2. If the cursor is not already visible, press
ENTER
for the cursor to appear.
3. Use the trackpad to place the cursor in the zoom window. The text ZOOM is
displayed near the cursor, as in Figure 5-9 .
D6200-1
ZOOM FREQUENCY BTM.LOCK A-SCOPE
AUTO G RZ
50kHz
0
20
40
60
x4
55
Zoom Range Bar
Zoom Cursor ,
controlled by trackpad
Manual mode only
Zoom Factor
ZOOM
ZOOM
AUTO MAN
ZOOM
X 2 4 6
ZOOM
ZOOM
OFF ON
81213_1.book Page 21 Monday, March 17, 2003 1:14 PM