Raymarine L1250DRC, Owner'S Handbook Manual

Page: 91 / 246

Chapter 4: System Setup 4-13
Si
mu
la
to
r
Simulator
The simulator enables you to operate your display without data from the
transducer and/or external data sources. The system set up simulator options
have the following functions:
• Data provides simulated numerical data and a waypoint display.
• Radar (integrated systems with a radar display) provides simulated radar
picture, with example targets. The picture does not change if you change
the range, although the range rings are adjusted (see
Pathfinder Radar
documentation)
.
• Both provides simulated data and radar picture.
When the simulator is switched on, a
SIMULATOR
data box is displayed during
operation showing the simulation selected.
Fishfinder simulator mode is set in the Sonar setup menu, as described in
Section 4.4 .
4.4 Sonar Set Up Parameters
The
SONAR SET UP
option enables you to set up the fishfinder according to
your system configuration and your personal preferences.
The following table lists the Sonar Set Up parameters and their options, shows
the factory default setting, and provides a space for you to make a note of your
new setting. Each parameter is described in the following subsections.
Table 4-3: Fishfinder Set Up Parameters
Parameter Options
Factory
Default
New Setting
TARGET DEPTH ID OFF
ON OFF
COLOR BAR OFF
ON ON
DEPTH DIGIT SIZE LARGE
SMALL LARGE
SONAR HSB MODE REPEATER
MASTER REPEATER
DEPTH OFFSET Value 0.0
SPEED CALIBRATE 0% to 200% 100%
TEMP CALIBRATE -9.0 °F to +9.0 °F 0°F
SONAR HISTORY LARGE or SMALL LARGE
SONAR
SET UP¬
81213_1.book Page 13 Monday, March 17, 2003 1:14 PM