Raymarine L1250D, Owner'S Handbook Manual

Page: 69 / 246

Chapter 3: Getting Started 3-3
Po
we
ri
ng the
Di
sp
la
y Un
it
Figure 3-2: Typical Sonar Mode Display at Switch On
Chart Mode (Raychart Models only)
If the display was last used in chart mode before being powered off, it will
return to chart mode the next time it is switched on. When the keys light up in
chart mode, the Raychart graphic is displayed, followed by the caution:
WARNING:
Raychart chart displays are based on cartographic data that C-MAP
believes to be accurate. However, you should not rely on these displays as
your primary source of navigation. Rather, your Raychart should be used
only as a backup to official government charts and traditional methods of
navigation.
When you have read and understood the caution, press the
CONTINUE
soft key.
The chart is displayed.
If this is the first time the chartplotter has been turned on, and no chart card is
installed, the display shows the small-scale world map and the default soft
keys. Otherwise, the display shows the selected chart area and any data that
were displayed when the display was last used.
D6180-1
ft
ZOOM FREQUENCY BTM.LOCK A-SCOPE
AUTO G RZ
50kHz
0
60
20
40
81213_1.book Page 3 Monday, March 17, 2003 1:14 PM