7-30
HD Series Fishfinders
Fo
llow
in
g R
out
es
an
d Goin
g to P
o
int
s
7.5 Following Routes and Going to Points
The default soft key
GOTO
accesses the functions to
FOLLOW
a route and
GOTO
a waypoint or cursor. When you select the target destination, the chartplotter
calculates bearing, distance and cross track error; this information is passed to
a helmsman or autopilot. You can also restart the cross track error (XTE) from
the actual vessel position to set XTE to zero at that point.
When the chartplotter is following a route, the target destination is indicated
by a square around the waypoint (or cursor marker) and a dotted line shows the
intended track, from your start point or previous waypoint, to the target
waypoint.
This section describes the following:
•
Follow a route either forwards, or in reverse order
•
Target Point Arrival
•
Other follow route options, including joining at a selected waypoint,
advancing waypoints, and restarting XTE
•
Go to an individual point, either an existing waypoint or the cursor
•
Stop and Restart Follow/Goto
An alarm is triggered when you approach a waypoint, this section describes
what happens when you arrive at waypoints.
Chapter 8
describes how to set
the alarm.
The chartplotter can also display the vessel’s actual track and the track can be
recorded for later display. The Track function is described in the
Section 7.7
.
➤
To access the Goto/Follow soft keys, press the default soft key
GOTO
(the soft
keys differ if a follow or goto is already in progress):
Follow a Route
Note:
The current route may have been created on this display, or created on
another unit and received on this display via SeaTalk.
If a route has been reversed or if a route on screen was being followed but
stopped before completion, the target waypoint – outlined by a square box –
may be different to when the route was created.
You should always check the target waypoint before initiating a follow route.
GOTO
SCREEN
ROUTE
FIND SHIP
D4160-1
GOTO
D4171-1
GOTO
CURSOR
FOLLOW
ROUTE
GOTO
WAYPOINT
81213_1.book Page 30 Monday, March 17, 2003 1:14 PM
Summary of Contents for L1250D
