Raymarine L1250D, Owner'S Handbook Manual

Page: 92 / 246

4-14 HD Series Fishfinders
Ta
rg
et
D
ep
th
ID
Target Depth ID
You can select whether or not the depth is displayed for displayed fishfinder
echoes. When Target Depth ID is set to
ON
, the depth is displayed just above
each fish echo. When set to
OFF
, the depth of each echo is not displayed.
Color Bar
The color bar indicates the range of echoes displayed in each color. When set
to
ON
the color bar is displayed on the right hand side of the display.
Depth Digit Size
The depth under the boat is displayed in the bottom left hand corner of the
fishfinder display. You can select small or large digits for the depth display.
Sonar HSB Mode
Depth data is sourced from the sonar master, which is the unit to which the
transducer is connected. This setting was originally established for networks
that have multiple
hsb
2
Series Fishfinders for designating whether the
Fishfinder is a MASTER (directly displaying sonar data images) or a REPEATER
display (connected via
hsb
2
to the Fishfinder master and repeating its sonar
data images).
The DSM250 is permanently set as the sonar master. For the sounder module
to properly repeat its sonar image data to the display unit, the display must be
designated as the sonar
REPEATER
.
The default setting is
REPEATER
. For HD Series displays, this setting should
not be changed from the default.
Note: Ensure that only one device is designated as a sonar master. Having
more than one master unit on the hsb
2
network c an cause unpredictable re-
sults .
SONAR INT REJ AUTO, LOW or
HIGH AUTO
SONAR SIMULATOR OFF
ON OFF
Table 4-3: Fishfinder Set Up Parameters
Parameter Options
Factory
Default
New Setting
81213_1.book Page 14 Monday, March 17, 2003 1:14 PM