Raymarine L1250D, Owner'S Handbook Manual

Page: 198 / 246

8-4 HD Series Fishfinders
Al
arm
s a
nd
T
im
ers
8.3 Alarms and Timers
Alarm Reporting
The chartplotter reports the following alarms, that are set using the
ALARMS
key:
Alarm Indicates:
Arrival Your vessel has arrived at the active waypoint: it has either
reached the arrival circle (the radius of which is specified) or,
has reached its closest point of approach (defined by a line
passing through the waypoint and perpendicular to the route
leg).
Off Track Your vessel has exceeded the specified distance (maximum
cross track error) from the active route leg.
Anchor Your vessel has drifted from its anchor position (set when the
alarm was turned on) by more than the specified distance.
Grounding The chartplotter checks a sector ahead of your vessel for a
dangerous object (land, depth area, intertidal area, rock,
obstruction or shore obstruction). You specify the depth and
range of the sector from your vessel.
You can view a report of the objects that triggered the alarm.
Countdown The countdown timer has reached zero.
Alarm Clock The time matches the specified alarm time.
The alarms are switched on or off and the limits set using the Alarms Set Up
menu, accessed from the
ALARMS
key.
When an alarm is triggered, the alarm buzzer sounds and a pop-up window
describing the alarm is displayed.
➤
To silence the alarm and clear the message, press any key.
If the alarm was generated by the chartplotter, the appropriate action is taken.
For example, following an arrival alarm, the next route leg is activated.
If an anchor alarm is silenced, but the alarm condition persists, the alarm is
repeated every 30 seconds.
External Alarms
All SeaTalk system alarms (except autopilot alarms) are received and
displayed on the chartplotter. You can silence these alarms by pressing any
key. No other action is taken by the chartplotter except to silence the alarm.
ALARMS
81213_1.book Page 4 Monday, March 17, 2003 1:14 PM