Raymarine L1250D, Owner'S Handbook Manual

Page: 85 / 246

Chapter 4: System Setup 4-7
C
ursor R
ea
dout
• Mag/True: The actual bearing in either degrees magnetic or degrees true.
If you choose this mode, the selection you made for the previous parame-
ter (Bearing Mode), °M or °T, is displayed in the cursor (Rng/Brg) data
boxes. The current units are shown for the heading value in the status bar
at the top of the screen.
Cursor Readout
Note: This option only pertains if your system includes a radar display.
This option controls whether the cursor data is shown in latitude and longitude
or in range and bearing. Alternatively, you can show both types of readout, in
separate boxes, or turn the cursor data box off.
You can also turn the cursor readout box(es) on and off during normal
operation, via the
SCREEN
default soft key (see Switching the Cursor Data Box
On and Off on page 5-23) .
Day/Night
This option enables you to change the display between day and night modes.
NIGHT
mode uses a different color palette, more suited to night time viewing.
The default setting is
DAY
.
Help
When Help is set to
ON
, a prompt appears when selecting a soft key or menu
choice and when using the context-sensitive cursor. The help message is
cleared when an action is selected.
Soft Keys
When the Soft Keys option is set to
ON
, the default soft keys are displayed if no
other operation is in progress.
When the Soft Keys option is set to
OFF
, the default soft keys are only
displayed when a soft key is pressed. The Soft Keys disappear if no operation
is performed for 10 seconds.
Key Beep
This option controls whether or not the keys sound a tone when you press
them.
81213_1.book Page 7 Monday, March 17, 2003 1:14 PM