Raymarine L1250D, Owner'S Handbook Manual

Page: 224 / 246

B-2 HD Series Fishfinders
A
ppendi
x B:
Usin
g
the
A
uxil
ia
ry
Junc
tio
n Box
Raystar 112, 105, Apelco 182 and 182XT
To connect your GPS to your Fishfinder, you must first cut off the 6-pin
connector and strip back the insulation on all the wires. Connect to the
Auxiliary Junction Box as shown in the first illustration below.
To connect your Differential Beacon Receiver, you must cut off the 5-pin
connector, strip back the insulation on all the wires, and connect to the
Auxiliary Junction Box as shown in the second illustration below.
CAUTION:
Ensure the correct polarity of the 12 V supply before applying display or
SeaTalk power. It is recommended that a multimeter is used to check the
connections.
12V
Power
Supply
(fused)
From
GPS
sensor
Yellow
Green
White
Brown
Red
Black
To Display Unit
SeaTalk Socket
D4294-3
Red
Black
12V
Power
Supply
(fused)
From
GPS
sensor
Yellow
White
Green
Red
Black
Yellow
Green
White
Brown
Red
Black
To Display Unit
SeaTalk Socket
D4295-3
From
the
DBR
Red
Black
81213_1.book Page 2 Monday, March 17, 2003 1:14 PM