Raymarine L1250D, Owner'S Handbook Manual

Page: 99 / 246

Chapter 4: System Setup 4-21
Po
siti
on Of
fse
t
➤
To switch the position offset on/off:
1. Select the
POSITION OFFSET
option, then press the
OFFSET OFF ON
soft key
to toggle the option on/off. The last selected offset value is added to posi-
tion data and the vessel is displayed at the corrected position.
➤
To set a new offset value:
1. Select the
POSITION OFFSET
option, then press the
SET UP OFFSET
soft key.
If necessary, position offset is automatically toggled on.
2. Use the trackpad to move the cursor to the desired vessel position; the cur-
sor position is displayed in a position offset data box.
3. Press the
ACCEPT OFFSET
soft key, the vessel is displayed at the new posi-
tion. Press
ENTER
to return to the default display.
➤
To set the offset value to zero:
1. Select the
POSITION OFFSET
option, then press the
SET UP OFFSET
soft key
2. Press the CANCEL OFFSET soft key. The position offset value is set to zero.
81213_1.book Page 21 Monday, March 17, 2003 1:14 PM