Raymarine L1250D, Owner'S Handbook Manual

Page: 106 / 246

5-6 HD Series Fishfinders
Se
lect
in
g t
he
M
ode
of
Ope
rati
on
• Chart display: If data is available on the display or via the
hsb 2
link, it can
be displayed.
• Radar display: If data is available via the
hsb 2
link, it can be displayed.
• Depth/temp graph (Sonar mode only): This shows a plot water temper-
ature and depth against time.
• CDI: This gives the Course Deviation Indicator graphical display, with
data relating to the target waypoint.
• BDI: This gives the Bearing and Distance Indicator graphical display, with
data relating to the target waypoint.
• Nav Data (Chart or Radar mode): This shows sixteen data boxes, pro-
viding navigational data in the units specified in your set up.
➤
To select a Horizontal half-screen window for display:
1. From the full-screen Sonar or Chart mode, press the
DISPLAY
key.
The following soft keys are displayed with an image of each available win-
dow:
Fishfinder
Chart
2. In Sonar mode, set
SPLIT
to
HOR
. To select a different window, press either
SELECT WINDOWS
soft key until the desired window is highlighted.
3. If necessary, press
WINDOWS OFF ON
to toggle Windows on
.
4. Press
ENTER
.
5. To toggle Windows off, press the
WINDOWS OFF ON
soft key.
If any data boxes were displayed at the bottom of the full-screen image, they
are switched off until you return to full-screen mode. However, you can use
the
SCREEN
soft key in chart mode to switch the data boxes on - they are
displayed in the upper window.
Note: You can use the
SCREEN
soft key in chart mode to switch the data boxes
on. They are displayed in the upper window.
Figure 5-2 and Figure 5-3 show the half-screen horizontal windows in Sonar
Mode.
SELECT
WINDOWS
WINDOWS
OFF ON
SPLIT
HOR VER
D5011-1
DISPLAY
DISPLAY
D4156-2
SELECT
WINDOW WINDOWS
OFF ON
81213_1.book Page 6 Monday, March 17, 2003 1:14 PM