Raymarine E70085 Dragonfly Operation Manual Download Page 77

Page: 77 / 96

Maintenance menu

This menu provides access to systems settings reset and diagnostics.

Menu item

Description

Options

About This Unit

Displays a list of details about your unit.

• Device

• Serial No.

• Software

Settings Reset

This option resets your menu options to factory default. It will
NOT affect your waypoints or tracks.

• Yes

• No

Settings and Data Reset

In addition to the settings reset detailed above, performing a
settings and data reset will also remove ALL waypoint and
track data.

• Yes

• No

Back-up Settings

Back-up settings to a memory card.

Restore Settings

Restore saved settings from a memory card.

Save Logs

Allows you to save error logs to SD card for troubleshooting
purposes.

Erase Logs

Selecting this option will erase any crash logs on the device.

Tools & Settings

Summary of Contents for E70085 Dragonfly

































































































Search results

Summary of Contents for E70085 Dragonfly

Reviews:

Related manuals for E70085 Dragonfly

Brands by name

Popular brands

Raymarine E70085 Dragonfly, Operation Manual

Search results

Summary of Contents for E70085 Dragonfly

Reviews:

Related manuals for E70085 Dragonfly

Brands by name

Popular brands