Raymarine E70085 Dragonfly, Operation Manual

Page: 38 / 96

6.6 DownVision check
Warning: Sonar operation
• NEVER operate the sonar with the vessel out of
the water.
• NEVER touch the transducer face when the
sonar is powered on.
• SWITCH OFF the sonar if divers are likely to be
within 7.6 m (25 ft) of the transducer.
Checking the DownVision application
From the DownVision application:
1. Check the display.
With the DownVision active you should see a depth reading
in the data cell in the top left of the display.
6.7 Shortcuts page
The shortcuts page provides access to the following functions:
D12781-1
2
4
5
3
1
1 Brightness control.
2 PowerSave mode — selecting will activate PowerSave mode.
3 Enable / Disable Sonar — selecting will enable or disable the
internal sonar and DownVision.
4 Eject SD card — select to safely remove the memory card.
5 Screen capture — selecting saves a screenshot to memory
card.
Opening the shortcuts page
With the display powered on:
1. Press the Power button once.
The shortcuts page is displayed.
2. Use the Joystick to highlight a control.
3. Press the OK button to select the control.
Adjusting the display brightness
1. Press the POWER button once.
The Shortcuts menu is displayed.
2. Adjust the brightness to the required level using the Rotary
control .
Note: The brightness level can also be increased by pressing
the Power button multiple times.
PowerSave mode
In PowerSave mode all functions of the product remain active,
but the display is placed into a low power state. PowerSave
mode is cancelled by pressing a physical button or when an
alarm event occurs.
Enabling PowerSave mode
To enable PowerSave mode follow the steps below.
1. Press the POWER button.
The shortcuts menu is displayed.
2. Select PowerSave Mode .
The display is now in PowerSave mode.
3. You can wake the display from PowerSave mode at anytime
by pressing a physical button.
Note: PowerSave mode is automatically cancelled if an alarm
event occurs.
Disabling and enabling the Sonar
The Sonar / DownVision ping can be disabled and enabled from
the shortcuts page.
1. If the Sonar and DownVision are active then select Disable
Sonar .
2. If the Sonar and DownVision are inactive then select Enable
Sonar .
38
Dragonfly