Raymarine E70085 Dragonfly Operation Manual Download Page 51

Page: 51 / 96

8.10 Chart Settings menu

The options below are available from the Chart Settings menu.

Chart Detail

Determines the level
of detail displayed
on-screen.

• High (default)

• Low

Chart
Orientation

Determines whether
North or the current
Course is shown at the
top of the screen.

• North Up (default)

• Course Up

Boat Position

Determines the position
of the vessel icon
on-screen.

• Centre (default)

• Offset

COG Vector

Determines whether
the green COG line is
displayed on-screen.

• Off (default)

• On

Deep Water
From:

The chart will use this
depth as the deep water
boundary. Water areas
with depths greater than
this will be colored white.

• Off

• 7 ft

• 10 ft

• 16 ft

• 20 ft

• 33 ft

• 66 ft (default)

Chart application

Summary of Contents for E70085 Dragonfly

































































































Search results

Summary of Contents for E70085 Dragonfly

Reviews:

Related manuals for E70085 Dragonfly

Brands by name

Popular brands

Raymarine E70085 Dragonfly, Operation Manual

Search results

Summary of Contents for E70085 Dragonfly

Reviews:

Related manuals for E70085 Dragonfly

Brands by name

Popular brands