Raymarine E70085 Dragonfly, Operation Manual

Page: 17 / 96

3.3 Tools required for installation
D12785-1
1
4
6
2
3
5
7
1. Power drill.
2. Pozidrive screwdriver.
3. 3 mm (5/32) Allen key.
4. Marine grade sealant.
5. Suitable sized drill bit.
6. Adhesive tape.
7. 18 mm (23/32”) Hole saw (only required if you are routing
the cable through the transom.
Additional tools required
When surface mounting the display the following additional tools
are required.
D12776-1
1 2
4
3
1. Jigsaw.
2. 32 mm (1 1/4”) hole saw.
3. 7 mm (9/32”) spanner.
4. File.
3.4 Installation process
The steps listed below are required to successfully install your
product and ensure optimum performance.
1. Mounting the transducer.
2. Mounting the display.
3. Testing the transducer.
4. Finishing the transducer mounting.
Planning the installation
17