7.1 Controls — DV, DVS, Pro and M
1
2
3
4
5
6
D13194-1
1
–
button
Zoom out / Range out
2
+
button
Zoom in / Range in
3
Directional track pad with OK button
— Used for
navigating menus and applications and selecting
items.
4
Back button / View switcher button
• Press once to return to a previous menu or
application state.
• Press in the Chart application to exit cursor mode
and centre the vessel on-screen.
• Press in the Sonar or DownVision applications to
resume scrolling from a paused state.
• From the top level application state (Motion mode
or Scrolling mode) press once to open the View
switcher (
DVS
and
Pro
variants only).
5
Power / Shortcuts page button
• Press once to power the unit on.
• When turned on, pressing the power button will
display the Shortcuts page.
• Press and hold to turn the display off.
6
MicroSD card reader
– open the chart reader cover
to insert or remove a MicroSD card. The card reader
can be used for software updates, electronic charts
and archiving data and user settings.
Note:
Electronic cartography can only be used
with the
Pro
and
M
variants.
7.2 Switching the unit on and off
Powering the unit on
1. Press and hold the
Power
button for
approximately 3 seconds to power up the unit.
* On display products after approximately 5
seconds the splash screen is displayed.
2. * Press
OK
to accept the Limitations of Use
disclaimer when it appears.
Note:
* Does not apply to
Wi-Fish
™
.
Powering the unit off
1. Press and hold the
Power
button for
approximately 6 seconds.
On display products a 3 second count-down timer
will be displayed.
To cancel the power off process, release the
power button before the unit powers off.
Note:
The unit will still draw a small amount of
power from the battery when powered off, if this
is a concern unplug the connector from the back
of the unit.
Low voltage warning
A warning message is displayed when the product’s
voltage supply drops below 10 V dc; the warning
will clear automatically when the voltage supply
raises above 11 V dc. The product may not operate
correctly when the supply voltage is outside of the
specified operating voltage range. Please refer
to the product’s Technical specification for power
specification limits.
50
Dragonfly–4 / Dragonfly–5 / Dragonfly–7 / Wi–Fish
