![background image](http://html.mh-extra.com/html/raven/omnirow/omnirow_installation-manual_788985023.webp)
3
Manual No. 016-3001-012
19
Hydraulic System Installation
FIGURE 20.
Pressure and Tank Hoses Installed
1.
Install the supplied hydraulic hoses on each end of the installed tee fittings in Port 2 of the PWM valves,
continuing from one section to the next, until all pressure hoses are installed.
2.
Install the supplied hydraulic hoses on each end of the tank tee fittings, continuing from one section to the
next, until all tank hoses are installed.
Left End Configuration
Left Middle Configuration
Right End Configuration
Right Middle Configuration
Tank
Pressure
Tank
Pressure