![background image](http://html.mh-extra.com/html/raven/omnirow/omnirow_installation-manual_788985015.webp)
3
Manual No. 016-3001-012
11
Hydraulic System Installation
FIGURE 9.
Final Assembly
Note:
If the motor will be tied into hex shafts on both sides of the motor, replace the hex spacer (P/N 107-
0172-017) and washer (P/N 313-2300-136) with another coupler (P/N 107-0172-043). The final
assembly should appear as shown in Figure 10 below:
FIGURE 10.
Drive Coupler Assembly - Motor Tied on Both Sides
Mount the OmniRow Hydraulic Motors
Important:
Ensure the motor, mounting bracket, and hardware do not come into contact with the parallel linkage
bars or row cleaner/coulter attachments when the row unit travels up and down.
Left Mounting
1.
Replace the existing bolts used to secure the support/bearing hanger (f equipped) with the supplied 3/8”-16
x 1-1/2” hex bolts (P/N 311-0054-107).