![background image](http://html.mh-extra.com/html/raven/omnirow/omnirow_installation-manual_788985021.webp)
3
Manual No. 016-3001-012
17
Hydraulic System Installation
Mount the OmniRow Hydraulic Valve
FIGURE 18.
OmniRow Hydraulic Valve Installed
Note:
The OmniRow hydraulic valve should be mounted at the front of the planter, near the hitch in a
location that allows the hydraulic hoses to be connected to it without interference. Refer to the
machine-specific hydraulic installation sheet for the location. Ports P, T, and EF should face the
planter’s hitch and Ports G1, G2, and T2 should face the planter’s tool bar if possible.
Drawbar Mounting
1.
Secure the OmniRow hydraulic valve to the mounting bracket (P/N 107-0171-956) using two 3/8”-16 x 4-3/
4” UNC-2 machine bolts (P/N 311-0054-207) and two 3/8”-16 zinc flanged lock nuts (P/N 312-1001-164).
2.
Mount the valve to the machine by “sandwiching” the planter’s left diagonal draw bar between the two
mounting brackets (P/N 107-0171-956 and 107-0171-979) using four 5/16”-18 x 4-3/4” bolts (P/N 311-0052-
610), four 5/16”-18 flanged lock nuts (P/N 312-1001-169), and four 5/16” washers (P/N 313-2300-011).
Note:
The two mounting brackets can be both P/N 107-0171-956 or one 107-0171-956 bracket and one
107-0171-979 bracket.
Planter Frame Mounting
1.
Secure the OmniRow hydraulic valve to the mounting bracket (P/N 107-0171-956) using two 3/8”-16 x 4-3/
4” UNC-2 machine bolts (P/N 311-0054-207) and two 3/8”-16 zinc flanged lock nuts (P/N 312-1001-164).
2.
Secure the mounting bracket to the planter’s frame.
Install the Planter Row Unit Pressure and
Tank Hoses
Refer to the supplied machine-specific hydraulic installation sheet included with the OmniRow installation kit to
install the planter row unit pressure and tank hoses.
P/N 107-0171-956
P/N 107-0171-979
or 107-0171-956
Drawbar Mounting
Planter Frame Mounting