![background image](http://html.mh-extra.com/html/raven/omnirow/omnirow_installation-manual_788985016.webp)
Chapter 3
12
White MultiRow OmniRow™ Installation Manual
FIGURE 11.
Mounting Bracket Installed
2.
Mount the motor mounting bracket (P/N 107-0172-003) on the bolts.
3.
Secure the motor mounting bracket with the supplied 3/8” zinc flanged lock nuts (P/N 312-1001-164).
FIGURE 12.
Hydraulic Motor Installed
4.
Mount the hydraulic motor (P/N 416-8001-001) to the motor mounting bracket using 3/8” x 2-1/2” L bolts
(P/N 311-0054-111) and loosely secure with 3/8” zinc flanged lock nuts.
5.
Install the 3/4” hex shafts.
Note:
Refer to the machine-specific installation guide to determine the section divisions of the planter
and the corresponding 3/4” hex shaft.
6.
Secure the hex shafts with existing shaft collars, supplied hex collars (P/N 107-0172-082), and/or cotter
pins on the opposite side of the existing bearing or sprocket that is not next to an OmniRow hydraulic motor.
P/N 107-0172-003