Raven OMNiDRIVE, Installation And Operation Manual

Page: 54 / 275

Chapter 2
Tablet and Field Hub Connections
1. Connect the tablet charger cable (P/N 420-1011-013) to the power port on the tablet.
2. Connect the charger cable to the tee power cable (P/N 115-2610-084) using the
adapter power cable (P/N 115-2610-085).
3. Locate the 2-pin plug on the battery to roof cable from the roof and insert the mating
connector from the tee power cable.
4. Connect the combine power cable (P/N 115-2610-065) to the remaining connector on
the tablet tee power cable.
5. Route the square, 4-pin plug on the combine power cable to the power port on the
Slingshot® Field Hub.
6. Connect the round, 4-pin plug on to the port labeled X6 on the Ethernet switch.
7. Connect the tablet Ethernet cable (P/N 420-2002-081) to the Ethernet port on the tab-
let.
8. Route the Ethernet cable to the port labeled X5 on the Ethernet switch.
Power Connection
1. Connect the battery to roof cable to the auxiliary power adapter strip located to the
right of the operator seat.
54