Raven OMNiDRIVE, Installation And Operation Manual

Page: 14 / 275

Chapter 1
l
Maintain control of safety devices such as E-Stop
1
s at all times during oper-
ation.
l
Disable this Raven system prior to starting any maintenance work on the imple-
ment or components of this Raven system.
l
Do not attempt to modify or lengthen any of the system control cables. Extension
cables are available from a local Raven dealer.
Field Computers, Displays, and Control Consoles
l
If the display will not be used for an extended period, it is best to remove the display
from the machine and store it in a climate controlled environment. This may help to
extend the service life of electronic components.
l
To prevent theft, secure the display and GNSS
2
antenna when leaving the machine
unattended.
DANGER
Anhydrous Ammonia (NH3)
Anhydrous ammonia (NH3) under pressure. NH3 can cause severe burning, blindness,
sickness, or death. Understand all safety instructions and warnings before operating or
servicing equipment.
l
Review the properties of NH3 and the procedures for safe handling, and use with your
NH3 supplier.
l
Contact your NH3 supplier or the appropriate agricultural department for train-
ing on handling, transporting, transferring, and applying NH3. Training should be
completed at least every three years.
l
Always wear appropriate personal protective equipment (PPE) when installing,
inspecting, servicing, and operating the NH3 system. Appropriate PPE includes,
but is not limited to:
l
Liquid proof gauntlet-style gloves impervious to NH3.
l
Long sleeved shirt and long pants or protective suit.
1
Emergency stop button or switch.
2
Global Navigation Satellite System
14