Raven OMNiDRIVE, Installation And Operation Manual

Page: 16 / 275

Chapter 1
l
Test excess flow valves and document the date and result of tests. Replace
any components that do not pass inspection as needed.
l
Never uncouple an NH3 applicator or intermediate towing vehicle without appro-
priate parking stands, wheel chocks, or other braking systems if a nurse take
wagon is attached.
l
Immediately evacuate the area in case of leak or accidental release of NH3.
Contact your local fire department, and identify sources of clean water on the
unit.
l
In case of exposure, flush exposed skin and eyes immediately with large quant-
ities of water for at least 15 minutes and seek immediate medical attention.
l
NH3 can be harmful to the environment if not used properly.
l
Follow all federal, state, and local regulations regarding the handling and use of
NH3.
l
Only NH3 harness systems, control systems, and on/off valves approved by Raven
Industries are recommended for use with NH3 products. Raven shall not be liable for
any damages and this warranty shall not cover defects from:
l
The use of a system with a harness not approved by Raven.
l
The use of a control system not approved by Raven.
l
The use of an on/off valve not approved by Raven.
l
The use of the system in a manner that is inconsistent with the instructions.
l
Unauthorized modification to the system or products used in the system.
l
Follow the best practices for installing and routing hoses provided in "Recom-
mendations and Best Practices" on page 20.
Autonomous Equipment
l
Improper use of autonomous equipment, or faulty route planning, may cause property
damage, personal injury, or death.
l
Instruct personnel working in the operational area and vicinity of the autonom-
ous tractor of safety procedures and use of the tractor Lockout Switch.
l
As an autonomous vehicle, the machine may move without an operator in the
seat. Maintain a safe distance from the machine while the OMNiDRIVE™ system
is enabled for autonomous operation.
16