Raven Envizio Pro, Installation & Operation Manual

Page: 226 / 232

Appendix F
216 Envizio Pro and Envizio Pro II Installation and Operation Manual
Stop
When finished recording a Zone or Boundary, touch the Stop button to close Zone or Boundary.
Note:
The field computer will draw a straight line from the starting point of the feature to the machine’s
current location when closing the spray zone map feature.
AutoBoom™
The AutoBoom Off icon is displayed when the feature is turned off. Touch this icon to toggle
AutoBoom On. Automatic boom height management cannot be Enabled if AutoBoom is Off.
The AutoBoom On icon is displayed when the feature is turned on. Touching this icon will toggle
the feature Off. Important: Each boom must be Enabled before the Glide Series AutoBoom will
automatically control boom height.
AutoBoom™ Status Indicator
The AutoBoom Off indicator is displayed when the AutoBoom feature is turned off. Boom height
management is not enabled.
The AutoBoom On/Disabled indicator is displayed when the AutoBoom feature is On but boom
height management is not enabled.
The AutoBoom On/Left Enabled indicator displays when AutoBoom is On and boom height
management is only Enabled for the left boom. AutoBoom will not adjust the height of the right
boom.
The AutoBoom On/Right Enabled indicator displays when AutoBoom is On and boom height
management is only Enabled for the right boom. AutoBoom will not adjust the height of the left
boom.
The AutoBoom On/Enabled indicator displays when AutoBoom is On and boom height
management is Enabled for both booms.
Note:
If operating with an UltraGlide AutoBoom system, the set Sensor Height is displayed in the Status
Display. If an optional center rack sensor is installed, the actual height of the center rack will be
displayed in this area.
Stop No-Spray
Zone
Stop Spray
Zone
Stop Field
Boundary