Raritan PXE User Manual Download Page 334

Page: 334 / 382

Chapter 8: Using the Command Line Interface

318

Querying DNS Servers

This command syntax queries Internet domain name server (DNS)
information of a network host.

diag>

nslookup <host>

Variables:



<host> is the name or IP address of the host whose DNS information
you want to query.

Showing Network Connections

This command syntax displays network connections and/or status of
ports.

diag>

netstat <option>

Variables:



<option> is one of the options:

ports

connections

Option

Description

ports

Shows TCP/UDP ports.

connections Shows

network

connections.

Summary of Contents for PXE






























































































































































































































































































































































































Search results

Summary of Contents for PXE

Reviews:

Raritan PXE, User Manual, Page: 334 / 382

Search results

Summary of Contents for PXE

Reviews: