Raritan PXE, User Manual

Page: 275 / 382

Chapter 8: Using the Command Line Interface
259
Managing Role-Based Access Control Rules
You can add, delete or modify role-based access control rules.

An IPv4 role-based access control command for managing rules
begins with
security roleBasedAccessControl ipv4 rule
.

An IPv6 role-based access control command for managing rules
begins with
security roleBasedAccessControl ipv6 rule
.
Adding a Role-Based Access Control Rule
Depending on where you want to add a new rule in the list, the command
syntax for adding a rule varies.

IPv4 commands
Add a new rule to the bottom of the IPv4 rules list:
config:# security roleBasedAccessControl ipv4 rule add <start_ip> <end_ip> <role> <policy>
Add a new IPv4 rule by inserting it above or below a specific
rule:
config:# security roleBasedAccessControl ipv4 rule add <start_ip> <end_ip> <role> <policy>
<insert> <rule_number>

IPv6 commands
Add a new rule to the bottom of the IPv6 rules list:
config:# security roleBasedAccessControl ipv6 rule add <start_ip> <end_ip> <role> <policy>
Add a new IPv6 rule by inserting it above or below a specific
rule: