Rapid Shape D50+, Translation Of The Original Operating Instructions

Page: 69 / 96

Operating Instructions D50+ | P50+ | SHERAprint 50
69
│
96 Rapid Shape GmbH
│
DOCR000438
10 Cleaning & Maintenance
10.1 Overview of the Cleaning & Maintenance Work
Interval Activities See Chapter
Daily Cleaning the protective glass
→
10.1.1
Daily Cleaning the build platform
→
10.1.2
Daily Cleaning the knife
→
10.1.3
Daily Cleaning the knife drip guard
→
10.1.4
Daily Cleaning the material reservoir
→
10.1.5
Daily Cleaning the collection basket
→
10.1.6
Weekly Calibrating the exposure unit
→
10.1.7
Weekly Checking the separation unit
→
10.1.8
Weekly Checking the refill unit
→
10.1.9
Monthly Checking the parallelism
→
10.1.10
As required Performing automatic reservoir cleaning
→
10.1.11
As required Cleaning the hose
→
10.1.12
As required Changing the knife
→
10.1.13
As required Changing the hose
→
10.1.14
NOTE!
This work is only to be carried out in a UV-protected
space to avoid the polymerisation of material residues
on individual components during cleaning and
maintenance work.
NOTE!
To prevent soiling the machine, the knife and the build
platform have always to be removed first before
removing the reservoir from the machine.
The cleaning and maintenance of the machine is an
integral part of a properly functioning machine. It is
therefore essential to observe the prescribed cleaning
and maintenance work.
All other maintenance work is only allowed to be
carried out by the Rapid Shape Customer Service.
For further information please contact Customer
Service.