Operating Instructions D50+ | P50+ | SHERAprint 50
15
│
96
Rapid Shape GmbH
│
DOCR000438
1.5.4
Chemical Dangers
WARNING!
Risk of injury due to harmful materials!
The chemical materials required for the production and
post-processing of 3D print matter can release harmful
vapours and cause dizziness and irritation of the
respiratory tract. Direct skin contact may cause skin
irritation.
–
It is necessary to provide sufficient fresh air.
–
Wear appropriate protective clothing and carry
out the work with ventilation if necessary.
–
Comply with the dosing instructions from the
respective manufacturer.
–
Please take note of the safety data sheets for the
respective materials.
1.5.5
Danger due to Hot Surfaces
CAUTION!
Risk of injury due to hot surfaces!
The hot air fans in the machine can heat up during
operation and cause hot surfaces on the fan housing.
–
The hot air fans are not allowed to be touched
when hot.
1.5.6
Danger of Material Damage
NOTE!
Material damage due to overheating!
Too high ambient temperatures and a disabled air
outlet may lead to an overheating of the overall system.
–
The air outlet must never be covered.
–
Maintain the specified ambient temperature.
(
→
Chapter 12.1)
–
Never install the machine in a closed cabinet.
–
Keep a minimum distance of 50 cm behind the
machine so that the heat generated can be
dissipated without hindrance.
