R&S NRX Series, User Manual

Page: 387 / 514

Remote Control Commands
R&S
®
NRX
387 User Manual 1178.5566.02 ─ 07
Setting parameters:
<string> "<old name>","<new name>"
If the old name is incorrect, an error occurs.
Example: MEM:TABL:MOVE "Test 1","test_5#"
Usage: Setting only
MEMory:TABLe:RESet
Deletes the content of all frequency-dependent correction tables and resets the names
to factory default, "Table 1", "Table 2" and so on.
To delete the content of a specific table, use
MEMory:CLEar:TABLe
.
Usage: Event
MEMory:TABLe:SELect <name>>
Selects one of the available offset tables for the following commands:
●
MEMory:TABLe:GAIN[:MAGNitude]
●
MEMory:TABLe:GAIN:POINts?
●
MEMory:TABLe:FREQuency:POINts?
●
MEMory:TABLe:FREQuency
●
MEMory:TABLe:DATA?
●
MEMory:TABLe:DATA:POINts?
Alternatively, you can use
CALCulate<Measurement>[:CHANnel<Channel>]:
CORRection:OFFSet:TABLe:INDex
.
Setting parameters:
<<name>> "<table name>"
You can query the table names using
MEMory:CATalog:
TABLe?
.
Example: MEM:TABL:SEL "Table 1"
Usage: Setting only
Manual operation: See "Frequency dependent offset table" on page 119
13.13 System Information and Configuration
The SYSTem subsystem contains a series of commands for general functions that do
not directly affect the measurement.
Further information:
●
Chapter 11, "System Settings" , on page 136
System Information and Configuration
www.allice.de Allice Messtechnik GmbH