System Settings
R&S
®
NRX
140
User Manual 1178.5566.02 ─ 07
Remote command:
SYSTem:COMMunicate:NETWork[:IPADdress][:ADDRess]
SYSTem:COMMunicate:INET[:SELF]:ADDRess
Subnet Mask ← IPv4 tab
Available if "Static" is set under
.
Sets the subnet mask of your local subnet.
Remote command:
SYSTem:COMMunicate:NETWork[:IPADdress]:SUBNet:MASK
SYSTem:COMMunicate:INET[:SELF]:SUBNetmask:ADDRess
Default Gateway ← IPv4 tab
Available if "Static" is set under
.
Sets the IP address of the default gateway.
Remote command:
SYSTem:COMMunicate:NETWork[:IPADdress]:GATeway
SYSTem:COMMunicate:INET[:SELF]:GATeway:ADDRess
DNS Server ← IPv4 tab
Available if "Static" is set under
.
Sets the DNS server address of your local subnet.
Remote command:
SYSTem:COMMunicate:NETWork[:IPADdress]:DNS
SYSTem:COMMunicate:INET[:SELF]:DNS:ADDRess
11.1.2
Remote Settings
Access: [System]
> "Connections"
> "Remote"
Contains the settings for remote control.
The "Remote" dialog is divided into the following tabs:
Interface - VISA Resource table
................................................................... 141
............................................................................................... 142
.................................................................................142
............................................................................... 143
........................................................................................ 143
.......................................................................................143
Connections
www.allice.de
Allice Messtechnik GmbH