R&S NRX Series User Manual Download Page 149

Page: 149 / 514

System Settings

R&S

NRX

149

User Manual 1178.5566.02 ─ 07

11.1.4

Sensor Manager

Access: [System]

> "Connections"

> "Sensor Manager"

Helps you to manage power sensors, for example, if more than 4

power sensors are

connected, or if you want to connect a LAN power sensor.

The R&S NRX recognizes and adds the following power sensors:

●

Connected to the ports

A to D. They are assigned the letter of the port.

●

Connected to one of the USB host interfaces; directly or indirectly, by USB hub.
They are assigned the letters E to M.

R&S power sensors that are connected to the LAN interface are not recognized auto-
matically. Add them, see

"To add a LAN power sensor"

on page 149.

Symbol

Description

LED icon

Tap to identify a connected power sensor. If the power sensor has a status LED, it flashes
yellow for 5

seconds.

Info icon

Tap to open the "Sensor Info" dialog, see

"Sensor Info"

on page 150.

To add a LAN power sensor

1. In the "Manage Sensors" dialog, tap "Add Sensor".

2. Enter the hostname or IP address of the power sensor.

3. Tap "Check Sensor".

4. Tap "Accept".

Connections

www.allice.de

Allice Messtechnik GmbH

Summary of Contents for NRX Series



































































































































































































































































































































































































































































































































Search results

Summary of Contents for NRX Series

Reviews:

Related manuals for NRX Series

Brands by name

Popular brands

R&S NRX Series, User Manual

Search results

Summary of Contents for NRX Series

Reviews:

Related manuals for NRX Series

Brands by name

Popular brands