R&S NRX Series, User Manual

Page: 147 / 514

System Settings
R&S
®
NRX
147 User Manual 1178.5566.02 ─ 07
"Trigger Out" Available for the Out 1 / Trig Out BNC connector "I/O 1" tab.
Provides a trigger signal at the Out 1 / Trig Out connector. Select the
trigger source under Trigger Source for Trigger Output .
"Trigger In" Available for the Trig In / Out 2 BNC connector ("I/O 2" tab).
Apply an external trigger signal at the Trig In / Out 2 connector. Set
the termination resistance under Impedance for Trigger Input .
Remote command:
[SENSe<Sensor>:]POWer:REFLection:RANGe:LIMit[:STATe]
on page 284
[SENSe<Sensor>:]POWer[:POWer]:RANGe:LIMit[:STATe]
on page 284
OUTPut:MODE<output>
on page 368
Measurement for Recorder Output ← I/O 1, I/O 2 tabs
Available if Mode is set to:
●
"Analog Out"
●
"Forw Analog Out"
●
"Refl Analog Out"
Sets the measurement of which the results are output.
Remote command:
OUTPut:RECorder<output>:FEED:INDex
on page 369
0 V Equivalent ← I/O 1, I/O 2 tabs
Available if Mode is set to:
●
"Analog Out"
●
"Forw Analog Out"
●
"Refl Analog Out"
Enter the measurement value that corresponds to 0 V output voltage.
Remote command:
OUTPut:RECorder<output>:LIMit:LOWer:CCDF
on page 369
OUTPut:RECorder<output>:LIMit:LOWer:POWer
on page 370
OUTPut:RECorder<output>:LIMit:LOWer:RATio:RCOefficient
on page 370
OUTPut:RECorder<output>:LIMit:LOWer:RATio:RFRatio
on page 371
OUTPut:RECorder<output>:LIMit:LOWer:RATio:RLOSs
on page 371
OUTPut:RECorder<output>:LIMit:LOWer:RATio:SWR
on page 371
OUTPut:RECorder<output>:LIMit:LOWer:RATio[:VALue]
on page 372
OUTPut:RECorder<output>:LIMit:LOWer[:VALue]
on page 370
2.5 V Equivalent ← I/O 1, I/O 2 tabs
Available if Mode is set to:
●
"Analog Out"
●
"Forw Analog Out"
●
"Refl Analog Out"
Enter the measurement value that corresponds to 2.5 V output voltage.
Remote command:
OUTPut:RECorder<output>:LIMit:UPPer:CCDF
on page 372
OUTPut:RECorder<output>:LIMit:UPPer:POWer
on page 373
OUTPut:RECorder<output>:LIMit:UPPer:RATio:RCOefficient
on page 373
OUTPut:RECorder<output>:LIMit:UPPer:RATio:RFRatio
on page 374
Connections
www.allice.de Allice Messtechnik GmbH