Remote Control Commands
R&S
®
NRX
382
User Manual 1178.5566.02 ─ 07
Example:
"Table 2,TABL,84"
Usage:
Query only
MEMory:CATalog[:ALL]?
Queries information on the available setups and frequency-dependent correction tables
stored on the R&S NRX. Combines the information queried by.
●
●
The response consists of:
<used disk space>, <remaining disk space>, "<setup 1>", "<setup 2>", "<setup 3>", ...,
"<table 1>", "<table 2>", "<table 3>", ...
Each <setup> and <table> consists of:
<name>,<data type>,<required disk space in bytes>
Example for <setup>:
"Setup 1,STAT,1212479"
Example for <table>:
"Table 2,TABL,84"
Usage:
Query only
MEMory:CLEar:TABLe
Deletes the content of the selected correction table.
Use
Notice: Once send, you cannot cancel this command. Cleared values are irretrievably
lost.
Alternatively, you can use
Example:
MEM:CLE:TABL
Usage:
Event
MEMory:CLEar[:NAME]
<name>>
Deletes the content of the correction table or setup carrying the specified name.
Notice: Once send, you cannot cancel this command. Cleared values are irretrievably
lost.
Setting parameters:
<<name>>
Name of the correction table or setup
Example:
MEM:CLE "Setup 9"
Usage:
Setting only
Managing Setups and Correction Tables
www.allice.de
Allice Messtechnik GmbH
