R&S NGU, User Manual

Page: 72 / 214

Instrument functions
R&S
®
NGU
72 User Manual 1179.2531.02 ─ 03
See Figure 6-35 for details of the trigger-in parameters.
4. Select "Enable" and set it "On" to enable the trigger-in setting.
5. Select "Back" to go back to "Device" menu.
6. Select "Digital Output" to configure the trigger-out parameter.
The R&S NGU displays the "Digital Output" dialog.
Figure 6-38: Digital Out dialog
7. Depending on your requirements, select the digital output accordingly.
The Digital I/O output pins OUT1 can be set directly by the SCPI commands. See
DIO:OUTPut[:STATe]
on page 171.
See also Figure 6-35 for details of the trigger-out parameters.
8. Select the respective "Digital Output" menu items and set "On" to enable the trig-
ger-out parameters.
9. Select "Back" to go back to "Device" menu.
10. If "User Button" is set as a trigger-in signal, select "User Button" menu item.
The R&S NGU displays the "User Button" dialog.
See also Chapter 6.11, "User key" , on page 77.
11. Select "User Button Action" and set as "Trigger".
The R&S NGU generates a trigger-in signal when user button key is pressed.
12. If "Logging" is set as a trigger-out signal, select "Logging" menu item.
The R&S NGU displays the "Logging" dialog.
See also Chapter 6.13, "Data logging" , on page 79.
13. Select "Triggered" and set as "On".
The R&S NGU starts the data logging of the instrument when a trigger is detected.
14. If "Arbitrary" is set as a trigger-out signal, select "Arbitrary" menu item from the
channel menu.
The R&S
NGU displays the "Arbitrary" dialog.
See also Chapter 6.10.1, "Arbitrary" , on page 73.
Trigger / Digital I/O