Remote control commands
R&S
®
NGU
171
User Manual 1179.2531.02 ─ 03
TRIGger
Selected channel external trigger signal is used as the digital
output source.
FORCed
Selected output is forced to high level and can be switched by
on page 171 command.
Parameters for setting and query:
<arg0>
1
Channel selection for the digital output source.
Example:
DIO:OUTP:SOUR 1, OUTP
Channel 1 output is used as the digital output source.
Example:
DIO:OUTPut 1,0
DIO:OUTPut:SOURce 1,FORC
DIO:OUTPut 1,1
Digital I/O pin OUT1 is set to a "high" level
DIO:OUTPut[:STATe]
<arg0>, <arg1>
DIO:OUTPut[:STATe]?
<arg0>
Sets or queries the digital output channel selection.
Parameters:
<arg1>
1 | 0
Enables or disables the digital output state.
Parameters for setting and query:
<arg0>
1
Channel selection for the digital output source.
Example:
DIO:OUTP 1, 1
Enables channel 1 as the digital output source.
DIO:OUTPut:SIGNal
<arg0>, <arg1>
DIO:OUTPut:SIGNal?
<arg0>
Select digital output signal type.
Parameters:
<arg1>
CONStant | PULSe
CONStant
A constant level trigger signal is sent out
PULSe
An output pulse of 100 ms trigger signal is sent out
Parameters for setting and query:
<arg0>
Channel number.
Example:
DIO:OUTP:SIGN? 1
Returns signal type at digital output for channel 1.
Advanced operating commands
