Remote control commands
R&S
®
NGU
128
User Manual 1179.2531.02 ─ 03
UP
Increases current by a defined step size. See
]CURRent[:LEVel][:IMMediate]:STEP[:INCRement]
DOWN
Decreases current by a defined step size. See
]CURRent[:LEVel][:IMMediate]:STEP[:INCRement]
Parameters for setting and query:
<Channel list>
<list>
Example:
SOUR:CURR:NEG? (@1)
Queries the negative current at channel 1.
Example:
See
Example "Configuring the current output"
[SOURce:]CURRent:RANGe
<arg0>[, <Channel list>]
[SOURce:]CURRent:RANGe?
[<Channel list>]
Sets or queries the range for target current.
Refer the datasheet for the measurement accuracy according to the measurement
range selected.
Parameters:
<arg0>
Parameters for setting and query:
<Channel list>
<list>
Example:
CURR:RANG 8
Current programming range set to 8 A.
7.5.4
Resistance setting
The
SOURce:RESistance
subsystem contains the commands for setting the resist-
ance limit of the output channels. The default unit is ohms.
Configuration commands
