R&S NGU User Manual Download

Page: 2 / 214

This manual describes the following R&S

NGU models and options with firmware version 03.055 and

higher:

●

R&S

NGU201 2-QUADRANT SMU (3639.3763.02)

●

R&S

NGU401 4-QUADRANT SMU (3639.3763.03)

●

R&S

NGU-B105 IEEE-488 (GPIB) interface (3661.0763.02 )

●

R&S

NGU-K103 Digital I/O ports (3662.9335.02 )

●

R&S

NGU-K104 Digital voltmeter functionality (3663.0390.02 )

●

R&S

NGU-K106 Battery simulation (3663.0625.02 )

[email protected]

Internet:

www.rohde-schwarz.com

Subject to change – data without tolerance limits is not binding.
R&S

is a registered trademark of Rohde & Schwarz GmbH & Co. KG.

Trade names are trademarks of the owners.

1179.2531.02 | Version 03 | R&S

NGU

Throughout this manual, products from Rohde & Schwarz are indicated without the

symbol, e.g. R&S

NGU is indicated as

R&S

NGU

Summary of Contents for NGU























































































































































































































Search results

Summary of Contents for NGU

Reviews:

Related manuals for NGU

Brands by name

Popular brands

R&S NGU, User Manual

Search results

Summary of Contents for NGU

Reviews:

Related manuals for NGU

Brands by name

Popular brands