Remote control commands
R&S
®
NGU
174
User Manual 1179.2531.02 ─ 03
Parameters:
<arg0>
Sets the current limit at regular charge level.
Example:
BATT:SIM:CURR:LIM:REG?
Returns current limit at regular charge level for channel 1.
BATTery:SIMulator:RESistance?
Queries the battery simulator internal resistance (ESR).
Example:
BATT:SIMU:RES?
Queries channel 1 of battery simulator internal resistance.
Usage:
Query only
BATTery:SIMulator:SOC
<arg0>
BATTery:SIMulator:SOC?
Sets or queries the state of charge (SoC) of the battery simulator.
Parameters:
<arg0>
Sets SoC values.
Example:
BATT:SIM:SOC 20
Sets the channel 1 Soc to 20 %.
BATTery:SIMulator:TVOLtage?
Queries the terminal voltage (Vt).
Example:
BATT:SIM:TVOL?
Returns channel 1 terminal voltage of battery simulator.
Usage:
Query only
BATTery:SIMulator:VOC?
Queries the open circuit voltage (Voc).
Example:
BATT:SIM:VOC?
Returns the channel 1 open circuit voltage of battery simulator.
Usage:
Query only
BATTery:SIMulator:VOC:EMPTy?
Queries the open circuit voltage (Voc) for empty SoC, i.e SoC = 0 %.
Example:
BATT:SIM:VOC:EMPT?
Returns the channel 1 Voc of an empty charge battery.
Usage:
Query only
Advanced operating commands
