Instrument functions
R&S
®
NGU
64
User Manual 1179.2531.02 ─ 03
Figure 6-29: Battery model editor dialog
1. Configure the "Battery Model Editor" with the required state of charge (SoC), open-
circuit voltage (Voc) and internal resistance (ESR).
See also
2. Confirm values with the unit keys.
3. Select the or icon to add or remove a row of data from the model.
●
: A new row of data is added to the model. It is initially filled with the data of
the currently selected row.
●
: Removes the currently selected row from the model.
4. Select "Capacity" and "Initial SoC" to configure the capacity and initial state of
charge of the battery.
The R&S
NGU displays the on-screen keypad for data entry.
5. Select (existing file) to save the changes made to an existing file or select
(new file) to save the table as a new battery model file.
The R&S
NGU displays a popup message to show that the file was saved success-
fully.
Figure 6-30: File system message
Battery simulator
