R&S NGU, User Manual

Page: 31 / 214

Operating basics
R&S
®
NGU
31 User Manual 1179.2531.02 ─ 03
Function Description
OVP
If enabled, the icon is highlighted in white.
If triggered, the icon blinks.
See Chapter 6.8.2, "Overvoltage protection (OVP)" ,
on page 66.
OPP
If enabled, the icon is highlighted in white.
If triggered, the icon blinks.
See Chapter 6.8.3, "Overpower protection (OPP)" ,
on page 66.
Arbitrary mode
If enabled, the icon is highlighted in white.
If active, the icon blinks.
See Chapter 6.10.1, "Arbitrary" , on page 73.
Fast log
If active, icon is highlighted in white.
If disabled, icon is highlighted in gray.
See Chapter 6.14, "FastLog" , on page 81.
Ramp mode
If enabled, the icon is highlighted in white.
If active, the icon blinks.
See Chapter 6.10.2, "Ramp" , on page 76.
"Fast Transient Response"
If enabled, the icon is highlighted in white.
The time taken for voltage recovery (<=20 mV)
switches between 30
µ
s and 100
µ
s.
See Chapter 6.2.2, "Fast transient response" ,
on page 47.
"Internal Impedance"
If enabled, the icon is highlighted in white.
"Safety Limits"
If enabled, the icon is highlighted in white.
See Chapter 6.8.4, "Safety limits" , on page 67.
"Output Delay"
If enabled, the icon is highlighted in white.
The delay is the time between activation of the out-
put and applying voltage to the output.
See Chapter 6.2.3, "Output" , on page 48.
Current priority mode
If current priority mode is enabled, the icon is high-
lighted in red.
High capacitance mode ,
If high capacitance mode is enabled, the icon is
highlighted in white.
Modulation mode
Available only with R&S NGU401 model.
If modulation is enabled, the icon is highlighted in
white.
5.1.2 Channel display area
The R&S NGU channel display area provides the measurement range settings on the
left. On the right of the channel display area, it shows a statistic data of measurements
Display overview