R&S NGU, User Manual

Page: 126 / 214

Remote control commands
R&S
®
NGU
126 User Manual 1179.2531.02 ─ 03
[SOURce:]CURRent[:LEVel][:IMMediate]:STEP[:INCRement]
............................................. 126
[SOURce:]CURRent[:LEVel][:IMMediate][:AMPLitude]
....................................................... 126
SOURce:CURRent:NEGative[:LEVel][:IMMediate][:AMPLitude]
.......................................... 127
[SOURce:]CURRent:RANGe
...........................................................................................128
[SOURce:]CURRent[:LEVel][:IMMediate]:STEP[:INCRement] <stepsize>
[SOURce:]CURRent[:LEVel][:IMMediate]:STEP[:INCRement]? [<Optional default
step query>]
Sets or queries the incremental step size for the
CURR UP | CURR DOWN
command.
Setting parameters:
<stepsize> <numeric value> | DEF | DEFault
<numeric value>
Step value in A.
DEF | DEFault
Default value of stepsize.
Range:
0.0001 to 2.000
Increment: 0.0001
*RST:
0.010
Default unit: A
Parameters for setting and query:
<Optional default step
query> DEFault
Queries the default voltage step size.
Example: CURR:STEP 0.005
CURR:STEP DEF
VOLT:STEP? DEF
-> 0.1000E+00
Returns the default stepsize for current.
See
Example "Configuring the current output" on page 125.
[SOURce:]CURRent[:LEVel][:IMMediate][:AMPLitude] <current>
[SOURce:]CURRent[:LEVel][:IMMediate][:AMPLitude]? [<Channel list>]
Sets or queries the current value of the selected channel.
Parameters:
<current> <numeric value> | MIN | MINimum | MAX | MAXimum | UP |
DOWN | <list>
<numeric value>
Numeric value in the range of 0.000 to 6.010.
MIN | MINimum
Minimum current at 0.010 A.
MAX | MAXimum
Depending on the set voltage level, the maximum set current is
6.010 A.
For voltage range from 0 V to 6 V, maximum set current is 6.01
A.
For voltage > 6 V, maximum set current is 3.01 A.
Configuration commands