Raleigh Audio Premium Extreme RAKK dac, Assembly Manual

Page: 38 / 65

Wire the input jacks:
15. Wire the SPDIF input (RCA jack) as follows:
•
Make a twisted pair from an 8” piece of violet #22 wire and a 10” piece of black #22
wire.
•
On the uneven end, strip 1¾” from the black wire and tin just the tip.
•
Wrap the long stripped end of the black wire around the shell of the input RCA jack and
solder it.
•
Connect the violet wire to the center pin.
16.
Wire the AES/EBU input (XLR jack) as follows:
•
Prepare an 8” #22 violet/black twisted pair.
•
Connect the violet wire to pin 2 and the black wire to pin 3.
•
You previously wired a jumper between pin 1 and the adjacent tab.
17.
Wire the AES3id input (BNC jack) as follows:
•
Prepare an 8” #22 violet/black twisted pair.
•
Connect the violet wire to the center pin.
•
Connect the black wire to the shell.
18.
Wire the TOSLINK input (if used) as follows:
•
Prepare an 8” #22 violet/black twisted pair.
•
Connect the violet wire to SPDIF + and the black wire to SPDIF –.
19. If you have I2S cables, install them in their locations on the panel.
20. If you have an I2S Adapter, install it in its location on the panel.
21. If you have a USB Adapter, install it in its location on the panel.
You will wire the power later.
————————————————————————————
37