Raleigh Audio Premium Extreme RAKK dac, Assembly Manual

Page: 22 / 65

Top Panel Preparation
1.
Place the top panel such that the inside surface of the panel faces up and the edge with the lip
(front) is away from you.
2. Install one piece of 10” x 1” damping material on the inside of the top panel, centered
between the vents and the lip.
3. Install one piece of 10” x 1” damping material on the inside of the top panel, centered
between the back of the panel and the vents, but closer to the vents so as not to interfere with
attaching the back panel.
————————————————————————————
Back Panel Preparation
The back panel consists of two parts: an open frame that attaches to the other panels and a
customized insert that contains the jacks.
Place the insert inside the frame and secure them with ten 4-40 x
⅜ ” screws and ten Kep nuts.
Because two panels being clamped together inhibit vibration resonances, no damping treatment
is required for this panel.
————————————————————————————
21