Pre
wire
the
Active
Output
————————————————————————————
Wire the “From RAKK dac” inputs on the Active Output
1.
Prepare a 4”
#22 black wire.
•
Connect it to the “REF” pad.
2.
Prepare a 4” #22 orange/black twisted pair.
•
Connect the orange wire to the “R+” pad.
•
Connect the black wire to the “R-” pad.
3.
Prepare a 4” #22 blue/black twisted pair.
•
Connect the blue wire to the “L+” pad.
•
Connect the black wire to the “L-” pad.
————————————————————————————
Wire the External Mute
4.
Using a craft knife cut a gap in the trace that connects the two “external mute”
pads.
5.
Prepare a 24” #22 black/black twisted pair.
•
Connect the two wires to the two “external mute” pads.
————————————————————————————
Wire the Volume Control on the Active Output
(skip this section if you do not have a volume control)
6.
Prepare a 5½” #22 blue/black twisted pair.
•
Connect the blue wire to the volume control “L+” pad.
•
Connect the black wire to the volume control “L-” pad.
7.
Prepare a 4½” #22 orange/black twisted pair.
•
Connect the orange wire to the volume control “R+” pad.
•
Connect the black wire to the volume control “R-” pad.
————————————————————————————
14
Summary of Contents for Premium Extreme RAKK dac
