Rain Master RME HAWK, User Manual

Page: 58 / 72

56
The total gallons is the total since the last time you cleared it.
Note: The total gallons will automatically be cleared when you select a new pipe size (via
the Pipe Setup feature).
Note: This SETUP function will be skipped if you have not enabled the flow features .
EXAMPLE: You wish to determine how many gallons you use in a month.
At the beginning of the month:
Successively Press: until you see
Press: you will see
Press:
Note: If you hit SETUP while the words TOTAL/GALLONS are on the display you will
miss this Setup feature because the controller will go to the next Setup feature.
Then at the end of the month:
Successively Press: until you see
followed by
(this is your total gallons for the month)
.
Press:
Note: The totalizer will reset to 0, after 9,999,999 gallons.
FLOW PERCENTAGE
This feature can be used to globally establish station flow upper limits. The flow
percentage can be set from 5 to 80%. This feature can be used in two ways:
1. Assume limits need to be established for a new system and you wish
to have all station flow limits to be 15% above their nominal value.
Then
• Set the flow percentage to 15%.
• Run Automatic LIMITS (see next section) for all stations.
• The new limits will be automatically saved (nominal measured flow +
15%) for each station.
T O T A L … G A L S
PROGRAM
SETUP
QUIT
0
PROGRAM
CLEAR
T O T A L … G A L S
PROGRAM
SETUP
QUIT
2 5 2 5 6 7
PROGRAM