Rain Master RME HAWK, User Manual

Page: 53 / 72

QUIT
MANUAL
ENTER ENTER
SUN
1
FRI
6 9 0
ENTER
MANUAL
SETUP
C O D E 1 9 6 0
PROGRAM
0 0 0 0
ENTER
QUIT
ENTER
Note: 0000 is not a valid security code. 0000 means that the security code feature is not
activated
Enabling Security Code
Once you have completed operating or making changes to your controller you can enable
the security code:
Press:
The controller will go back to the Automatic Mode.
Should you forget to enable the security code, the code will automatically become enabled
at midnight and no one will be allowed to operate the controller without first entering
the security code.
Disabling Security Code (LOCKED Controller)
Once the Security Code feature has been enabled, it will be necessary to enter the security
code every time you wish to operate or change your controller.
To disable the security code used in the example above:
Press:
Eliminating Security Code
To eliminate the Security Code completely, first disable code as described above, then:
Press: 6 times you will see
Press:
Press:
SENSOR
Note: When this symbol appears in the beginning of the display screen, it indicates
that the Sensor is reading "Wet", and one or more programs that are enabled for sensor
operation have started. No stations, however, will water due to the wet condition.
The RME HAWK Controller has the ability to affect irrigation based on an external rain
sensor or remote switch. This feature can be programmed by individual program so that
one or more programs will cease watering as long as the rain sensor is active.
The external sensor or switch must be of the type which is Closed when there is no rain
51